Deutsch
MM3 MM3-WebAssistant

Safari Proxy Configuration

Quick Instruction - For experts

  1. Switch on the proxy of your system settings: For LAN and Dial-up enter the protocol types HTTPand FTP
    the address 127.0.0.1 and port 8080.
  2. Check the configuration: http://127.0.0.1:8080/proxyConfiguration

Step-by-Step Instruction - You would like detailed instructions

Note

The following configuration should be executed only by an expert.
We recommend to use the browser Firefox for other users.

Offline Configuration

For the configuration you open the dialog Network in the System Preferences.

  • (1) At Show you select Network Status

    You need an LAN network component, e.g. local network, hub, switch, router, DSL modem, cable modem, AirPort (WLAN).

    Note
    At first if such a component isn't available, this has to be created.
    If this isn't possible, please use another browser e.g. Firefox.
  • (2) Select a LAN network component
  • (3) Click on Configure...
Mac OS X: Network / Network Status
  • (4) Select tab TCP/IP

    Note
    At first if the lock symbol is closed, you must open the lock.
    You need administrator rights for the configuration.
  • If Off is selected in Configure IPv4
    (5) than switch to Manuelly
    and enter:
    IP Adress: 127.0.0.1
    Subnet Mask: 255.255.255.0
Mac OS X: Network / myLan / TCP/IP
  • (6) Select tab Proxies
  • (7) Enable the proxies FTP as well as HTTP after each other and
    enter respectively for the proxy server (8): 127.0.0.1:8080
  • (5) Please, enter:
    Bypass proxy settings for these Hosts: 127.0.0.1
Mac OS X: Network / myLan / Proxies

Online Konfiguration

You duplicate the configuration of your dialing connection at the best one. (For this at Show select the Network Port Configurations.) When connecting to internet you can select, whether you would like to surf with the MM3-WebAssistant - Proxy Offline BrowserMM3-WebAssistant or without this.

  • (1) At Show select the Dial-up network component
  • (2) Select tab Proxies

    Note
    At first if the lock symbol is closed, you must open the lock.
    You need administrator rights for the configuration.
  • (3) Enable the proxies FTP as well as HTTP after each other and
    enter respectively for the proxy server (4): 127.0.0.1:80800

    Note
    If entries are already available here then you transfer these in the MM3-WebAssistant - Proxy Offline BrowserMM3-WebAssistant from Surf Set/Protocol/Proxy.
  • (5) Please, enter:
    Bypass proxy settings for these Hosts: 127.0.0.1
  • (6) Click on: Apply Now
Mac OS X: Network / myDialUp / Proxies


Check

Please, check this settings now:
http://127.0.0.1:8080/proxyConfiguration
You need the MM3-WebAssistant - Proxy Offline BrowserMM3-WebAssistant for this check.

Disable the Proxy

You simply would like to switch between the direct connection and the connection with the MM3-WebAssistant - Proxy Offline BrowserMM3-WebAssistant, you set up two locations following the description.

If there isn't a LAN connection to other computers, you can also set up two Internet connects and select the required connection respectively.

<- Installation Offline Test ->
© MM3Tools, 23. October 2017 mail WebAssistant@MM3Tools.comLegal information